DAIICHISEIKO LARK 1800 Boat Rod Keeper Goodcatch Fishing Buddy

Description

A rod holder dedicated to cruiser and motorboat fishing to withstand the pulling of large fish.

Jerking back and forth, and attached or detached with just a single action.
Use the product for a fishing boat where the clamp-type Lark Saouke cannot be mounted.
Ease of mounting a wide variety of reels, ranging from small reels to large electrical reel.
The strongest Lark to withstand a load of 200 kg for a variety of fishing, ranging from middle-deep fishing to super-big fishing.
OK for a wide variety of fish, ranging from seabream to longtooth grouper.

Lark rod receiver
● Storage size (excluding base and rubber packing): 280x140x78mm
● Weight: 1340g
base
● Size: 114x120x43mm
● Accessories: Adapter set for fine rod diameter, drill (diameter φ5 mm), 8 tapping screws (φ6×30 mm), rubber packing, base, set pin
MADE IN JAPAN

1) Place the base of the Lark 1800 on the side of the boat and mark eight mounting hole positions on the base with an appropriate tool, such as a pencil.
2) Open rough holes with the provided drill at the positions marked in 1), and secure the base with the tapping screws through rubber packing.
3) Press fit rod holder A into the base and insert set pin B.
4) Bend set pin B for completion.
* Possible to remove set pin B and store the rod holder when not in use.